How To Reset DJI Spark Wi-Fi Password

Introduction

Welcome to the step-by-step guide on how to reset the Wi-Fi password of your DJI Spark. The DJI Spark is a compact and powerful drone that allows you to capture stunning aerial footage. To connect your mobile device to the Spark and control it, you need to establish a Wi-Fi connection between the two devices. However, there may be instances where you forget or want to change the Wi-Fi password. In such cases, it becomes necessary to reset the password in order to regain control of your drone.

This guide will walk you through the process of resetting the Wi-Fi password on your DJI Spark. By following these simple steps, you’ll be able to reconnect your mobile device to the drone’s Wi-Fi network and continue enjoying the exhilarating experience of controlling your DJI Spark.

Please note that this guide assumes you have already set up your DJI Spark and have the DJI GO 4 app installed on your mobile device. If you haven’t done so, make sure to complete the initial setup and download the app before proceeding with the Wi-Fi password reset process.

Now, let’s dive into the step-by-step instructions on how to reset the Wi-Fi password on your DJI Spark!

Step 1: Power on your DJI Spark

The first step in resetting the Wi-Fi password of your DJI Spark is to power on the drone. Ensure that the battery is adequately charged before turning it on. Once you have confirmed that the battery level is sufficient, press and hold the power button on the Spark for a few seconds until the LED lights start to blink.

Make sure to place the DJI Spark on a flat, stable surface during the power-on process to prevent any accidents or unintended movements. It’s important to have a stable and secure setup before moving on to the next steps.

Once the Spark is powered on, it will automatically start broadcasting its Wi-Fi network. This is necessary for establishing a connection with your mobile device. The Spark’s Wi-Fi network will be identified by a unique SSID, which will allow your device to recognize and connect to it.

Now that your DJI Spark is powered on and its Wi-Fi network is available, proceed to the next step to connect your mobile device to the drone’s network.

Step 2: Connect your mobile device to the Spark’s Wi-Fi network

After powering on your DJI Spark, the next step is to connect your mobile device to the Spark’s Wi-Fi network. This will establish a direct connection between your device and the drone, allowing you to control and manage its settings via the DJI GO 4 app.

To connect your mobile device to the Spark’s Wi-Fi network, follow these steps:

1. Open the Wi-Fi settings on your mobile device.
2. Locate and select the Spark’s Wi-Fi network from the list of available networks. The Spark’s Wi-Fi network name (SSID) should be displayed on the drone or in the documentation.
3. Enter the default Wi-Fi password when prompted. The default password can usually be found on a sticker located on the side of the Spark or in the user manual.
4. Wait for your mobile device to establish a connection with the Spark’s Wi-Fi network. The Wi-Fi icon on your device should indicate a successful connection.

Once your mobile device is connected to the Spark’s Wi-Fi network, you are ready to access the DJI GO 4 app, which will allow you to proceed with the Wi-Fi password reset process.

Remember, the Wi-Fi connection between your mobile device and the Spark is essential for controlling and managing the drone. Ensuring a stable and reliable connection is crucial to prevent any issues during the password reset process. Now that your mobile device is successfully connected to the Spark’s network, let’s move on to the next step of accessing the DJI GO 4 app.

Step 3: Access the DJI GO 4 app

After connecting your mobile device to the Wi-Fi network of the DJI Spark, it’s time to access the DJI GO 4 app. This app is the primary interface for controlling and configuring your DJI Spark drone.

To access the DJI GO 4 app, please follow these steps:

1. Locate the DJI GO 4 app icon on your mobile device’s home screen and tap it to open the app. If you haven’t installed the app yet, you can download it from the App Store (iOS) or Google Play Store (Android).
2. Wait for the app to load and display the home screen. This may take a few moments depending on your device’s processing power and internet connection.
3. If you have previously connected your mobile device to the Spark and logged into the app, it may automatically detect the connection and display a prompt to connect to the drone. In this case, proceed to the next step. Otherwise, follow the on-screen instructions to log in or create a DJI account.
4. Once you are logged into the DJI GO 4 app and it has detected the connection to the Spark, you will be ready to proceed with the Wi-Fi password reset process.

The DJI GO 4 app provides a comprehensive range of features and settings that allow you to optimize your drone’s flight experience. From flight controls to camera settings, you can customize your DJI Spark according to your preferences. Take your time to explore the various options available to familiarize yourself with the app’s interface and functionality.

With the DJI GO 4 app successfully accessed, you are one step closer to resetting the Wi-Fi password of your DJI Spark. Now, let’s move on to the next step, which is accessing the Wi-Fi settings within the app.

Step 4: Go to the Wi-Fi settings in the DJI GO 4 app

Once you have successfully accessed the DJI GO 4 app on your mobile device, it’s time to navigate to the Wi-Fi settings. In this step, you will find the option to reset the Wi-Fi password of your DJI Spark.

To go to the Wi-Fi settings in the DJI GO 4 app, follow these steps:

1. On the home screen of the DJI GO 4 app, look for the menu icon located in the top left or top right corner of the screen. It is usually represented by three horizontal lines or an icon with three dots.
2. Tap on the menu icon to open the app’s main menu. Here, you will find various options and settings related to your DJI Spark.
3. Scroll through the menu and locate the “Settings” or “Drone Settings” option. Tap on it to access the settings menu.
4. Within the settings menu, look for the “Wi-Fi Settings” option and select it. You may need to scroll down to find it.

Once you have entered the Wi-Fi settings, you will see the current Wi-Fi network details, including the network name (SSID) and password. This is the place where you can reset the Wi-Fi password of your DJI Spark. The exact location and wording of the reset option may vary depending on the DJI GO 4 app version or device you are using.

Now that you have reached the Wi-Fi settings in the DJI GO 4 app, it’s time to move on to the next step and reset the Wi-Fi password of your DJI Spark. Follow the instructions carefully to ensure a successful password reset process.

Step 5: Reset the Wi-Fi password

With the Wi-Fi settings menu opened in the DJI GO 4 app, you are now ready to reset the Wi-Fi password of your DJI Spark. Follow the steps below to carry out the password reset process:

1. Locate the option to reset the Wi-Fi password within the Wi-Fi settings menu. It may be labeled as “Reset Wi-Fi Password” or similar.
2. Tap on the reset option to initiate the password reset process.
3. A confirmation prompt or dialogue box will appear, asking you to confirm the password reset. Read the prompt carefully to ensure that you understand the consequences of resetting the password.
4. If you are certain that you want to proceed with the password reset, confirm your decision by tapping on the appropriate option.
5. Once you have confirmed the password reset, the DJI GO 4 app will generate a new Wi-Fi password for your DJI Spark.
6. Take note of the new Wi-Fi password and make sure to store it in a safe place for future reference.

It is essential to ensure that the new Wi-Fi password is kept secure and not shared with unauthorized individuals. This will help maintain the privacy and security of your DJI Spark drone.

At this point, you have successfully reset the Wi-Fi password of your DJI Spark using the DJI GO 4 app. Congratulations! You are now ready to reconnect your mobile device to the Spark’s Wi-Fi network using the new password.

In the next step, we will guide you through the process of reconnecting to the Spark’s Wi-Fi network with the new password. Follow the instructions carefully to establish a secure connection between your mobile device and the DJI Spark.

Step 6: Reconnect to the Spark’s Wi-Fi network with the new password

After resetting the Wi-Fi password of your DJI Spark using the DJI GO 4 app, it’s time to reconnect your mobile device to the Spark’s Wi-Fi network using the new password. Follow the steps below to establish a successful connection:

1. Open the Wi-Fi settings on your mobile device.
2. Locate and select the DJI Spark’s Wi-Fi network from the list of available networks.
3. Enter the new Wi-Fi password that was generated after resetting the password.
4. Wait for your mobile device to establish a connection with the Spark’s Wi-Fi network. The Wi-Fi icon on your device should indicate a successful connection.

Once your mobile device is successfully connected to the Spark’s Wi-Fi network using the new password, you are now ready to enjoy the full functionality and control of your DJI Spark drone with the updated Wi-Fi password.

As a security precaution, it is always advisable to periodically update and change your DJI Spark’s Wi-Fi password. This will help protect your drone from unauthorized access and ensure the privacy of its data.

By following this step-by-step guide, you have now successfully reset the Wi-Fi password of your DJI Spark using the DJI GO 4 app, and reconnected your mobile device to the Spark’s Wi-Fi network. You can now continue to explore the amazing features and capture breathtaking aerial footage with your DJI Spark drone.

If you have any further questions or encounter any issues during the password reset process, refer to the DJI Spark user manual or consult DJI’s customer support for assistance. Enjoy your flight!

Conclusion

Resetting the Wi-Fi password of your DJI Spark is a simple process that requires just a few steps. By following the step-by-step guide outlined in this article, you can quickly and easily reset the Wi-Fi password, allowing you to regain control of your drone and continue capturing incredible aerial footage.

Remember to start by powering on your DJI Spark and connecting your mobile device to the drone’s Wi-Fi network. Access the DJI GO 4 app to navigate to the Wi-Fi settings where you can reset the password. Once the password has been reset, reconnect your mobile device to the Spark’s Wi-Fi network using the new password.

It is important to note that periodically updating and changing your Wi-Fi password is crucial for maintaining the privacy and security of your DJI Spark. By doing so, you can prevent unauthorized access and ensure that your drone remains under your control.

If you have any difficulties or need further assistance with resetting the Wi-Fi password of your DJI Spark, refer to the user manual or contact DJI’s customer support for guidance.

Enjoy the incredible capabilities of your DJI Spark drone, and happy flying!