To connect a Ubotie wireless keyboard, first identify whether your model uses a 2.4GHz USB receiver or Bluetooth by checking what came in the box. If you have a small USB nano receiver, follow the 2.4GHz method; if not, your model likely uses Bluetooth.
How to connect a Ubotie wireless keyboard: identify your model
Ubotie wireless keyboards connect either via a 2.4GHz USB receiver or Bluetooth. The 2.4GHz models include a tiny USB receiver that plugs directly into your computer for an automatic, plug-and-play connection. Bluetooth models require pairing through your device's Bluetooth settings. Check your packaging: if you see a small USB dongle, use Method 1. If no receiver is present, your keyboard is Bluetooth-only and you should proceed to Method 2.
Method 1: Connect with the 2.4GHz USB receiver
- Locate the shared USB nano receiver. It is often stored inside the mouse battery compartment if you purchased a keyboard-and-mouse combo. Remove it carefully.
- Plug the nano receiver into an available USB port on your computer. Use a port directly on the computer rather than a hub for best results.
- Turn on the keyboard using its power switch. The power switch is typically located on the side or top edge of the keyboard. Slide it to the "On" position.
- The 2.4GHz keyboard and mouse should connect automatically within a few seconds, with no extra software needed. Test by opening a text document and typing.
This method is ideal if you want to connect wireless keyboard and mouse simultaneously, as the single receiver handles both devices. If you have lost your wireless keyboard USB receiver, you may need to contact Ubotie for a replacement, as third-party receivers are not guaranteed to work.
Method 2: Connect via Bluetooth
- Insert two AAA batteries into the keyboard if they are not already installed. Open the battery compartment on the underside, insert the batteries matching the polarity markings, and close the compartment.
- Turn on the keyboard using the power switch. The LED indicator near the switch should light up briefly to confirm power.
- Enable Bluetooth on your computer or device. Go to the Bluetooth settings menu and turn Bluetooth on.
- Put the keyboard into pairing mode. Locate the Bluetooth pairing button, usually labeled "Pair" or marked with a Bluetooth symbol. Press and hold it for a few seconds until the LED indicator starts flashing rapidly.
- On your device, select the Ubotie keyboard from the list of available Bluetooth devices. It may appear as "Ubotie Keyboard" or a similar name. Click or tap it to pair. If prompted, enter the pairing code shown on your screen using the keyboard and press Enter.
- Wait for the connection to establish. The LED indicator will stop flashing and remain solid once paired. Test the connection by typing in any application.
This method is essential if you need to connect keyboard to multiple devices or if your computer lacks a USB port.
Troubleshooting connection issues
If your Ubotie wireless keyboard does not connect, start with the simplest fixes. Check battery levels and replace them if needed. Ensure the power switch is in the On position. Restart your computer or device completely. For Bluetooth models, remove the keyboard from your device's Bluetooth list and re-pair it from scratch. For 2.4GHz models, try plugging the USB receiver into a different USB port and move the receiver away from metal objects or other wireless devices that could cause interference. If problems persist, check the manufacturer's website for any software or firmware updates for your specific model.
