Introduction
The Wowgo New Smart OLED Screen Electric Skateboard is a state-of-the-art innovation that offers a superior riding experience. With its sleek design and advanced features, this electric skateboard has quickly become a favorite among riders. One of the main attractions of the Wowgo New Smart OLED Screen Electric Skateboard is its remote control, which allows riders to effortlessly control the board’s speed and direction. However, syncing the remote to the Wowgo 2S board may seem like a daunting task for some users.
In this article, we will guide you through the process of syncing the Wowgo New Smart OLED Screen Electric Skateboard Remote to your Wowgo 2S Board. Whether you are a seasoned rider or a beginner, this step-by-step guide will help you establish a seamless connection between your remote control and skateboard.
By following these instructions, you will be able to unlock the full potential of your Wowgo electric skateboard and enjoy a hassle-free riding experience. So let’s dive in and get your remote synced in no time!
Step 1: Turn on the remote
The first step to syncing your Wowgo New Smart OLED Screen Electric Skateboard Remote to your Wowgo 2S Board is to turn on the remote itself. To do this, locate the power button on the remote. It is usually located on the front or the side of the remote, easily identifiable by its distinct shape or labeling.
Once you have located the power button, press it firmly and hold it down for a few seconds. Keep holding the button until the screen on the remote lights up. This indicates that the remote is successfully powered on and ready to be paired with your Wowgo 2S Board.
It is important to ensure that the remote has sufficient battery power for the syncing process. If your remote’s battery is low, it is advisable to charge it before proceeding with the syncing process. A fully charged remote will make the syncing process smoother and more efficient.
Remember, turning on the remote is the first crucial step towards syncing it with your Wowgo 2S Board. Once the remote is powered on, you are ready to move on to the next step.
Step 2: Power on the skateboard
With the remote turned on, it’s time to power on your Wowgo 2S Board. Locate the power switch on the skateboard, typically located on the underside of the board. The power switch may be labeled or indicated by a symbol such as a power symbol or an on/off indicator.
Once you have located the power switch, flip it to the “on” position. You should see the LED lights on the skateboard illuminate, indicating that the board is now powered on and ready to be paired with the remote control.
It is important to ensure that the skateboard has sufficient battery charge for the syncing process. If the battery is low, it is recommended to charge the skateboard before proceeding with the syncing process. This will ensure a stable and uninterrupted connection between the remote and the board.
Once you have powered on the skateboard, you are one step closer to syncing it with your Wowgo New Smart OLED Screen Electric Skateboard Remote. The next step will guide you through the process of pairing the two devices.
Step 3: Press and hold the power button on the remote
Now that both the remote and the skateboard are powered on, it’s time to initiate the pairing process. Start by firmly pressing and holding down the power button on the remote control. Make sure to hold the button for a few seconds to ensure a successful connection.
While holding the power button, you may notice the LED lights on the remote flashing or a vibration feedback indicating that the remote is searching for available devices to pair with. This process may take a few seconds, so be patient and continue to hold the power button until the remote is ready to establish a connection with the skateboard.
It is worth noting that the exact duration required to hold the power button may vary depending on the remote model or firmware version. Refer to the manufacturer’s guidelines or user manual for specific instructions related to your Wowgo New Smart OLED Screen Electric Skateboard Remote.
By pressing and holding the power button on the remote, you are putting it into pairing mode, allowing it to search for and establish a connection with the Wowgo 2S Board. Once the remote is in pairing mode, proceed to the next step to complete the syncing process.
Step 4: Tap the power button on the skateboard once
With the remote control in pairing mode, it’s time to establish a connection by interacting with the Wowgo 2S Board itself. Locate the power button on the skateboard, usually positioned near the rear or side of the deck.
Using your finger or thumb, lightly tap the power button on the skateboard once. This action sends a signal to the board, prompting it to search for and establish a connection with the remote control.
Upon tapping the power button, you may notice that the LED lights on the skateboard flash or change color. This indicates that the board has received the signal and is in the process of syncing with the remote. The pairing process may take a few seconds, so be patient and allow the devices to establish a secure connection.
It’s important to note that tapping the power button on the skateboard triggers the pairing process, allowing the board to communicate with the remote control. By initiating this action, you are one step closer to enjoying the seamless control and responsiveness of your Wowgo New Smart OLED Screen Electric Skateboard Remote.
Once the connection is established, you’re ready to move on to the next step to ensure that the syncing process is successful.
Step 5: Wait for the connection to establish
After tapping the power button on the skateboard, it’s time to give the devices some time to establish a connection. While the pairing process is in progress, it’s essential to be patient and let the Wowgo New Smart OLED Screen Electric Skateboard Remote and the Wowgo 2S Board communicate with each other.
During this waiting period, you may notice various indicators or feedback from both devices. The LED lights on the remote control and skateboard might continue to flash or change colors, signaling the ongoing pairing process. Additionally, there might be a vibration or audible signal from the remote, indicating that the connection is being established.
The duration for the connection to establish can vary, with most devices typically completing the pairing process within a few seconds. However, in some cases, it might take slightly longer. It’s important to avoid any interruptions or distractions during this time to ensure a successful connection between the remote and the skateboard.
While waiting, it’s advisable to keep the remote and the board within close proximity to maintain a strong and stable connection. Make sure that there are no obstacles or interference that may hinder or disrupt the syncing process.
Once the connection between the Wowgo New Smart OLED Screen Electric Skateboard Remote and the Wowgo 2S Board has been established, you’re ready to move on to the next step to test the remote and skateboard connection.
Step 6: Test the remote and skateboard connection
Now that the connection between the Wowgo New Smart OLED Screen Electric Skateboard Remote and the Wowgo 2S Board has been established, it’s time to test the functionality and responsiveness of the remote control.
Start by holding the remote control securely in your hand, ensuring a firm grip. With the board on a flat and stable surface, such as a smooth pavement or a skate park, begin to manipulate the controls on the remote. Adjust the speed settings, brake, or change modes to gauge the board’s response.
As you interact with the controls, pay close attention to how the skateboard reacts. The response should be immediate and correspond accurately to your input on the remote control. The acceleration, deceleration, and braking should be smooth and consistent, allowing you to maintain control and feel confident while riding.
If you notice any issues with the remote and skateboard connection, such as delayed response, unresponsiveness, or inconsistent behavior, consider re-syncing the devices. Repeat the steps outlined in this guide to establish a new connection and improve the performance.
It’s also a good idea to test the connection in various environments and terrains to ensure that the remote and skateboard connection remain stable throughout different riding conditions. This will help identify any potential issues and allow you to address them promptly.
By thoroughly testing the remote and skateboard connection, you can ensure that your Wowgo New Smart OLED Screen Electric Skateboard is functioning optimally and delivering a smooth and enjoyable ride.
With the remote and skateboard synced and the connection successfully tested, you can now confidently embark on thrilling skateboarding adventures with precise control and enhanced riding experience!
Conclusion
Congratulations! You have successfully synced your Wowgo New Smart OLED Screen Electric Skateboard Remote to your Wowgo 2S Board. By following the step-by-step guide outlined in this article, you have gained control over your electric skateboard’s speed and direction, unlocking a world of exhilarating rides and effortless maneuverability.
Remember, the process of syncing the remote and skateboard is a crucial step towards maximizing the performance and responsiveness of your Wowgo electric skateboard. By ensuring a strong and stable connection, you can enjoy a seamless riding experience, whether you’re cruising through the city streets or exploring new skate parks.
If at any point you encounter difficulties with the remote and skateboard connection, don’t hesitate to refer back to this guide. It may be necessary to repeat the syncing process or troubleshoot any potential issues that might arise. Additionally, consulting the manufacturer’s guidelines or reaching out to their customer support can provide further assistance.
Now that you’re armed with the knowledge and skills to sync your Wowgo New Smart OLED Screen Electric Skateboard Remote to your Wowgo 2S Board, it’s time to hit the streets and unleash your passion for skateboarding. Enjoy the thrill, control, and freedom that comes with riding your electric skateboard and have an amazing time exploring your city or mastering new tricks and maneuvers.
Always ride responsibly, wear appropriate safety gear, and obey local traffic laws and regulations. With proper care, maintenance, and the ability to control your skateboard with the remote, you’ll ensure a safe and enjoyable experience for yourself and those around you.
Get ready to embrace the freedom of electric skateboarding and make every ride an unforgettable adventure!
