Setting up your Spade and Co smartwatch requires the right companion app and a few careful steps to ensure a smooth connection. This guide covers the complete smartwatch setup and pairing process, from identifying your model to granting permissions and updating firmware. For troubleshooting common connection issues across any brand, see this smartwatch setup walkthrough.
Before you start: identify your Spade and Co smartwatch model
The first critical step is checking which model you own, because the correct companion app depends on it. Spade & Co sells two primary models: the Health Smartwatch 4 and the 2020 Smartwatch. Look at the device’s back or original packaging for the model name. Your phone must also be compatible: Android devices need Android 6 or higher, and iPhones need iOS 9 or higher. If you enjoy this setup process, you might also like building your own wearable from scratch with a diy smartwatch creation project.
Charge your smartwatch to 100%
Before initial use, fully charge your Spade & Co smartwatch using the magnetic charging cable until the battery reaches 100%. This ensures the device has enough power to complete the setup process without interruption.
Download the correct companion app
Open your phone’s app store and search for the app that matches your model. For the Health Smartwatch 4, download the VeryFit App. For the 2020 Spade & Co Smartwatch, download the VeryFitPro app. Installing the wrong app will prevent successful pairing.
Pair your smartwatch with your phone
- Enable Bluetooth on your smartphone.
- Open the downloaded companion app and either create a new account or log in to an existing one.
- In the app, select your specific Spade & Co smartwatch model from the list of available devices (for example, “Health Smartwatch 3” or “HEALTH4”).
- When a pairing request appears on both your phone and smartwatch, confirm it on both devices.
Grant permissions and complete your profile
When the app prompts you, grant all necessary permissions: location, Bluetooth, sensors, calls, contacts, and notifications. These permissions allow the smartwatch to function fully, including using your phone’s GPS for location tracking (the watch does not have internal GPS). After granting permissions, complete any remaining profile setup steps within the app, such as entering personal information.
Check for firmware updates
After successful pairing, check the companion app for any available firmware updates. Installing updates ensures you have the latest features and bug fixes for your device.
Customize your experience
With the core setup complete, you can now set up notifications, customize watch faces, and explore fitness tracking features directly from the app or the watch itself.
Troubleshooting common setup issues
If you encounter problems, start with these solutions:
- Wrong app: Verify you downloaded VeryFit for the Health Smartwatch 4 or VeryFitPro for the 2020 model.
- Pairing failures: Restart both your smartwatch and your smartphone, then try pairing again.
- Unresponsive screen: Perform a soft reset by holding down the power button until the device restarts.
