What batteries does a Roku remote take? Most standard Roku remotes use two AAA or two AA batteries, as indicated inside the battery compartment. The Roku Voice Remote Pro and Voice Remote Pro (2nd edition) have a built-in rechargeable lithium-ion battery, so they do not take disposable batteries at all.
Standard Roku remote batteries: AA or AAA
Standard Roku remotes require either AA or AAA size batteries, depending on the specific model. Before buying batteries, you might want to check how many inches is a Roku remote to ensure you have the right model. Check the markings inside the battery compartment to confirm which size your remote uses. Roku recommends using consumer-grade, non-rechargeable carbon-zinc or alkaline batteries for these remotes. There is a risk of explosion if batteries are replaced by an incorrect type, so always match the size and chemistry specified. To get the most consistent performance, Roku also recommends using batteries from the same manufacturer when possible and replacing all batteries at the same time.
How to replace the batteries in a standard Roku remote
- Slide the battery compartment open.
- Remove both old batteries.
- Insert the negative (-) terminal of the battery first.
- Gently push the positive (+) terminal until the battery clicks into place.
- Repeat for the second battery.
- Press any two buttons on the remote to reset it.
- Replace the battery cover.
This process ensures the remote pairs correctly with your Roku device after a battery change. Always dispose of old batteries according to local regulations.
Roku Voice Remote Pro: built-in rechargeable battery
The Roku Voice Remote Pro and Roku Voice Remote Pro (2nd edition) feature a built-in rechargeable lithium-ion battery. You do not need AA or AAA batteries for these models. To charge the remote, connect the small USB-C or micro-USB end of the USB charging cable to the charging port on your remote, then connect the other end of the cable to a standard USB power adapter. The remote can be used while charging. The status light on the remote flashes slowly when charging and turns solid when complete. For the Roku Voice Remote Pro, a full charge from empty takes 3 hours and typically lasts 2 months. Your Roku device displays an on-screen message when the rechargeable lithium-ion battery in your remote is getting low on power, so you will have advance notice to charge it.
Tips for extending your Roku remote's battery life
To get the most out of your remote's batteries, remove the batteries during long-term storage to prevent leakage and preserve battery life. Keeping the remote clean and dry also helps maintain proper electrical contact and reduces unnecessary drain. Note that using Headphone Mode on the Pro models will drain the battery more quickly, so disconnecting headphones when not in use can extend the time between charges.
Safety and troubleshooting for Roku remote batteries
If your remote feels hot, stop using it immediately. Do not remove batteries if they are hot; place the remote on a hard, non-flammable surface, like tile, and let it cool before handling again. If a battery leak occurs, handle items with rubber gloves and protective eyewear to reduce the chance of contact. If skin or eye contact with battery leakage occurs, flush immediately with clean water and seek medical assistance. Do not use damaged, deformed, or leaking batteries. If you have any issues with your Roku remote, always start by replacing the existing batteries with fresh new ones. This simple step resolves most remote problems before any further troubleshooting is needed.
