How To Use JBL Noise Cancelling Headphones



Welcome to the world of JBL noise cancelling headphones, where crisp audio and peace of mind merge to create an immersive listening experience. Whether you’re a frequent traveler seeking solace in the midst of airport chaos or a busy professional who needs to focus in a bustling office environment, JBL noise cancelling headphones are designed to provide you with a sanctuary of sound. In this guide, we will explore how to make the most out of your JBL noise cancelling headphones, from setting them up to optimizing their audio quality.

Noise cancelling technology has revolutionized the way we listen to music and consume audio content. By actively reducing external sounds, noise cancelling headphones allow us to delve deeper into our favorite tunes or immerse ourselves in the rich dialogue of a movie. It’s like having your own personal soundproof booth, wherever you go.

When it comes to JBL noise cancelling headphones, the brand is renowned for its commitment to delivering premium sound quality and comfort. By following a few simple steps, you can take full advantage of their features and enhance your listening experience.

In this guide, we will cover everything from connecting your headphones to a device, controlling noise cancellation levels, optimizing audio quality, adjusting the fit for maximum comfort, maintaining and cleaning your headphones, and troubleshooting common issues. So, whether you’re a tech enthusiast or a casual listener, let’s dive into the world of JBL noise cancelling headphones and discover how to unlock their full potential.


Understanding Noise Cancelling Technology

Noise cancelling technology is the key feature that sets JBL headphones apart from traditional headphones. It works by using built-in microphones to detect and measure ambient sound waves. These sound waves are then analyzed and a reverse sound wave is generated to cancel out the unwanted noise. The result is a significantly quieter listening environment, allowing you to focus on your audio without distractions.

There are two types of noise cancelling technology: passive and active. Passive noise cancelling relies on the physical design of the headphones to block out external noise. This is achieved through the use of insulation and sound-absorbing materials. While passive noise cancellation can be effective to some extent, it may not completely eliminate all background noise.

On the other hand, JBL noise cancelling headphones employ active noise cancelling technology, which actively counters the external noise. By creating sound waves that cancel out the incoming noise, active noise cancellation offers a more immersive and uninterrupted listening experience.

It’s important to note that noise cancelling is most effective in situations where the background noise is continuous and predictable, such as the low rumble of an airplane engine or the hum of a busy office. Sudden, sharp sounds like loud conversations or honking horns may still be audible to some degree.

Another aspect to consider is that noise cancelling technology can affect the audio quality of the content you’re listening to. While JBL headphones are designed to maintain high audio fidelity even with noise cancellation enabled, there may be a slight difference in sound signature compared to when noise cancellation is turned off. This is a trade-off for the benefits of a quieter listening experience.

Understanding how noise cancelling technology works will help you make the most out of your JBL headphones. In the next sections, we will delve into the setup process and explore the various features and functions that will allow you to customize your listening experience.


Setting Up Your JBL Noise Cancelling Headphones

Getting your JBL noise cancelling headphones set up is a breeze. Follow these simple steps to ensure a seamless setup process:

Step 1: Charging

Before using your headphones, it’s essential to ensure they have enough battery power. Most JBL noise cancelling headphones come with a built-in rechargeable battery. Connect the headphones to a power source using the provided USB cable and allow them to charge fully. The charging time may vary depending on the model of your headphones, so refer to the user manual for specific instructions.

Step 2: Powering On

Once your headphones are fully charged, you can power them on. Locate the power button on the headphones and press and hold it until you hear a startup sound or see an LED indicator light up. This indicates that your headphones are now on and ready to be connected to a device.

Step 3: Bluetooth Pairing

To connect your JBL noise cancelling headphones to a device, such as a smartphone or tablet, you’ll need to enable Bluetooth pairing mode. Check the user manual for your specific headphone model to find out how to activate pairing mode. Once in pairing mode, go to the Bluetooth settings on your device and search for available devices. Select your headphones from the list of available devices to establish a connection.

Step 4: Firmware Updates

It’s always a good idea to check for firmware updates for your JBL headphones. Manufacturers often release firmware updates to improve performance, add new features, or fix any bugs. To check for updates, visit the official JBL website or use the JBL app if there is one available for your headphones model. Follow the instructions provided to update the firmware of your headphones if necessary.

Step 5: Customization and Additional Settings

Once your JBL headphones are connected to a device, you can explore additional settings and customization options. Depending on your headphone model, you may have access to features such as equalizer settings, virtual assistant integration, or even custom sound presets. Take some time to familiarize yourself with the available settings and tailor the sound experience to your preferences.

By following these steps, you can ensure that your JBL noise cancelling headphones are set up correctly and ready to deliver a premium audio experience. In the next section, we will explore how to connect your headphones to a device and make the most out of their Bluetooth capabilities.


Connecting Your Headphones to a Device

Connecting your JBL noise cancelling headphones to a device, such as a smartphone or laptop, allows you to enjoy your favorite audio content wirelessly. Follow these steps to establish a seamless Bluetooth connection:

Step 1: Activate Bluetooth

Ensure that the Bluetooth functionality is enabled on the device you want to connect your headphones to. You can usually do this by accessing the device’s settings and finding the Bluetooth menu. Turn on Bluetooth if it’s not already enabled.

Step 2: Put Your Headphones in Pairing Mode

Activate pairing mode on your JBL headphones. The process may vary depending on the specific model you have. Refer to the user manual or the manufacturer’s instructions for your headphones to learn how to put them in pairing mode.

Step 3: Pairing

Once your headphones are in pairing mode, your device should be able to detect them. On your device, navigate to the Bluetooth settings and scan for available devices. Your JBL headphones should appear in the list of available devices. Select them to start the pairing process.

Step 4: Complete the Pairing Process

Follow the on-screen instructions on your device to complete the pairing process. This may involve entering a pairing code or confirming the connection on both your device and your headphones.

Step 5: Test the Connection

Once the pairing process is complete, ensure that the connection between your device and headphones is successful. Play a music track or a video on your device and verify that audio is coming through your headphones.

Step 6: Connect to Multiple Devices (if supported)

Certain JBL noise cancelling headphone models offer the ability to connect to multiple devices simultaneously. This feature allows you to seamlessly switch between different devices. Refer to the user manual or the manufacturer’s instructions to learn how to set up multiple device connections, if applicable.

By following these steps, you can effortlessly connect your JBL noise cancelling headphones to your preferred device and start enjoying your audio content without the constraints of wires. In the next section, we will explore how to control noise cancellation levels to tailor your listening experience.


Controlling Noise Cancellation Levels

JBL noise cancelling headphones give you the flexibility to adjust the level of noise cancellation according to your preferences and the surrounding environment. Here’s how you can control and customize the noise cancellation levels:

Step 1: Locate the Noise Cancellation Button

Find the dedicated noise cancellation button on your JBL headphones. The location of the button may vary depending on the model you have. Look for an icon that represents noise cancellation or a button labeled “NC” or “ANC” (Active Noise Cancellation).

Step 2: Understand the Noise Cancellation Levels

JBL noise cancelling headphones typically offer multiple noise cancellation levels, allowing you to choose the desired amount of noise reduction. Depending on the model, you may have options like “High,” “Medium,” and “Low,” or a slider that allows you to adjust the noise cancellation intensity.

Step 3: Adjust the Noise Cancellation

Press the noise cancellation button or use the corresponding controls to cycle through the available noise cancellation levels. On some models, you may need to press and hold the button to access the different levels. As you switch between levels, you’ll notice varying degrees of external noise reduction. Choose the level that best suits your environment and preferences.

Step 4: Test and Fine-tune

Once you’ve selected a noise cancellation level, take a moment to test it in your current surroundings. Adjust the level as needed to find the optimal balance between noise reduction and your desire to remain aware of your surroundings. This is particularly useful in situations where you may need to hear announcements or have conversations while still enjoying the benefits of noise cancellation.

Step 5: Save the Settings (if applicable)

Some JBL headphone models allow you to save your preferred noise cancellation settings. If this feature is available, refer to the user manual or manufacturer’s instructions to learn how to save your desired settings. This way, you won’t need to adjust the noise cancellation level every time you power on your headphones.

By controlling the noise cancellation levels on your JBL headphones, you can create a personalized listening experience that aligns with your preferences and the demands of your environment. In the next section, we will look at optimizing the audio quality to ensure a rich and immersive sound experience.


Optimizing Audio Quality

One of the key aspects of enjoying your JBL noise cancelling headphones to the fullest is optimizing the audio quality. Here are some tips to enhance your listening experience:

1. Equalizer Settings

Explore the equalizer settings available on your device or through the accompanying JBL app, if applicable. Adjusting the equalizer allows you to fine-tune the audio output to your liking, enhancing specific frequencies or adjusting the overall sound profile.

2. Source Quality

Ensure that the audio content you’re listening to is of high quality. Streaming services like Spotify, Apple Music, or Tidal offer options to adjust the streaming quality. Opt for a higher bitrate or lossless audio format whenever possible to ensure the best audio fidelity.

3. Audio Formats

If you’re a music enthusiast, consider exploring lossless audio formats such as FLAC or ALAC. These formats preserve the original audio quality and provide a more detailed and dynamic listening experience. Pair them with high-quality audio files to truly appreciate the nuances in the music.

4. Noise Cancellation Impact

Keep in mind that enabling noise cancellation may slightly affect the audio quality. While JBL noise cancelling headphones are designed to maintain high audio fidelity, there might be a slight difference in the sound signature when noise cancellation is active. Experiment with different levels of noise cancellation to determine the best balance between noise reduction and audio quality.

5. Volume Control

Avoid listening to audio at excessively high volume levels for extended periods of time, as this can harm your hearing. Set the volume at a comfortable level that allows you to fully appreciate the audio without causing discomfort or potential long-term damage.

6. Spatial Audio

If your JBL headphones support spatial audio technology, make sure to enable this feature when available. Spatial audio creates a more immersive soundstage, simulating a three-dimensional audio experience that enhances the sense of depth and directionality in the sound.

7. Audio Enhancements

Experiment with any additional audio enhancements or features provided by your JBL headphones. Depending on the model, you may have access to features such as bass boost, surround sound, or virtual sound profiles. Explore these options to customize the sound to your liking.

By following these tips, you can optimize the audio quality of your JBL noise cancelling headphones and enjoy a rich, immersive sound experience tailored to your preferences. In the next section, we will explore how to adjust the fit of your headphones for maximum comfort.


Adjusting the Fit for Maximum Comfort

In order to enjoy your JBL noise cancelling headphones for extended periods of time, it’s essential to ensure a comfortable fit. Here are some tips on adjusting the fit for maximum comfort:

1. Headband Adjustment

Start by adjusting the headband to fit comfortably on your head. Extend or retract the headband to find the right fit, ensuring that the headphones rest securely without exerting too much pressure on your head. The aim is to achieve a balanced fit that provides stability without causing discomfort.

2. Positioning the Earcups

Next, position the earcups over your ears. Gently place the earcups over your ears, ensuring that they fully encompass them without causing excessive pressure. The earcups should create a seal against your ears to effectively block external noise, but they shouldn’t be so tight that they cause discomfort or fatigue.

3. Adjusting the Earcup Angle

You may need to adjust the angle of the earcups to match the shape of your head and provide a secure fit. Some headphones have rotating or swiveling earcups, allowing you to find the most comfortable position. Experiment with the angle until you find the sweet spot that provides the best fit for your ears.

4. Earpad Material

Take note of the material used for the earpads on your JBL headphones. Some models feature memory foam or soft cushioning, which can provide additional comfort and reduce pressure on your ears. If your earpads are removable, consider upgrading to aftermarket earpads with superior comfort and durability.

5. Secure Fit for Physical Activities

If you plan to use your JBL headphones during physical activities, such as workouts or running, it’s important to ensure they have a secure fit. Look for models with a headband or earhooks designed for sports activities. These features provide additional stability and prevent the headphones from slipping or falling off.

6. Take Breaks

Even with a comfortable fit, it’s important to take regular breaks from wearing your headphones to prevent fatigue and discomfort. Give your ears and head a chance to rest and breathe. Taking short breaks can help maintain comfort during extended periods of use.

By adjusting the fit of your JBL noise cancelling headphones, you can ensure maximum comfort, allowing you to enjoy extended listening sessions without unnecessary discomfort or strain. In the next section, we will discuss the importance of maintaining and cleaning your headphones for long-lasting performance.


Maintaining and Cleaning Your Headphones

Proper maintenance and regular cleaning of your JBL noise cancelling headphones will not only help prolong their lifespan but also ensure optimal performance. Here are some essential tips for maintaining and cleaning your headphones:

1. Handling with Care

Handle your headphones with care to prevent any accidental damage. Avoid dropping them, sitting on them, or subjecting them to extreme temperatures or excessive force. Storing them in a protective case when not in use can also help protect them from scratches and other physical damage.

2. Detach and Clean the Earpads

If your headphones have detachable earpads, remove them gently and clean them separately. Use a mild soap or earpad cleaning solution along with a soft cloth or brush to clean any dirt, oils, or debris. Allow the earpads to fully dry before reattaching them to the headphones.

3. Clean the Headband and Earcups

Wipe down the headband and earcups regularly to remove any dirt or oils that collect on the surface. Use a slightly damp, soft cloth or an alcohol-free cleaning wipe to clean the exterior of the headphones. Avoid using harsh chemicals or abrasive materials that could damage the finish or the material of the headphones.

4. Cable and Connector Maintenance

If your headphones have detachable cables or connectors, periodically inspect them for any signs of wear or damage. Replace any frayed or damaged cables to maintain the best audio quality and prevent connectivity issues. Avoid pulling or yanking the cables too forcefully when detaching them from devices.

5. Store Properly

When not in use, store your JBL headphones in a clean and dry environment. Consider using a headphone stand or a case to keep them protected from dust, moisture, and potential damage. Proper storage prevents tangling of cables and prolongs their overall lifespan.

6. Avoid Excessive Exposure

Avoid exposing your headphones to extreme temperatures, direct sunlight, or excessive moisture. Protect them from moisture, such as rain or sweat, as it can damage the electronic components and affect the audio performance.

7. Refer to the User Manual

Always refer to the user manual provided with your JBL headphones for specific cleaning and maintenance instructions. Different models may have varying requirements, so it’s important to follow the manufacturer’s guidelines to avoid damaging your headphones.

By following these maintenance and cleaning practices, you can ensure that your JBL noise cancelling headphones remain in optimal condition, providing you with consistent audio quality and longevity. In the next section, we will explore some common issues you may encounter with your headphones and how to troubleshoot them.


Troubleshooting Common Issues

While JBL noise cancelling headphones are known for their reliability, occasional issues may arise. Here are some common problems you may encounter with your headphones and simple troubleshooting tips to resolve them:

1. No Sound

If you’re not getting any sound from your headphones, ensure that they are properly connected to your device. Check the audio settings on your device and make sure the volume is not muted or set too low. Also, ensure that the headphones are charged and powered on.

2. Poor Noise Cancellation

If you’re not experiencing the expected level of noise cancellation, check that the headphones are properly fitted over your ears. Adjust the earcups to create a secure seal. Additionally, make sure that the noise cancellation feature is enabled and set to an appropriate level.

3. Connectivity Issues

If your headphones are having trouble connecting to your device or experiencing frequent drops in connection, try the following steps: reset the Bluetooth settings on your device, unpair and re-pair the headphones, ensure that the headphones are within the Bluetooth range of your device, or try connecting to a different device to isolate the issue.

4. Battery Drain

If you’re experiencing unusually fast battery drain, ensure that you’re using the latest firmware for your headphones. Sometimes, firmware updates can address battery optimization issues. Additionally, disable any unnecessary features, such as high intensity noise cancellation or Bluetooth connectivity if not needed, as these can drain the battery faster.

5. Sound Imbalance or Distortion

If you’re noticing a sound imbalance or distortion, check the audio balance settings on your device. Ensure that the left and right channels are balanced. If the issue persists, try connecting your headphones to a different device to determine if the problem lies with the headphones or the audio source.

6. Unresponsive Controls

If the controls on your headphones are unresponsive or not functioning as expected, try resetting your headphones according to the instructions in the user manual. If the issue persists, reach out to JBL customer support for further assistance.

7. Physical Damage

If your headphones have suffered physical damage, such as a cracked headband or broken earcup, contact JBL customer support for repair or replacement options. Attempting to repair them yourself may void any warranty or cause further damage.

If none of the troubleshooting tips resolve the issues with your JBL noise cancelling headphones, it’s recommended to contact the manufacturer’s customer support for more specialized assistance. They will be able to provide further guidance or arrange repairs as needed.

By following these troubleshooting steps, you can address common issues and ensure that your JBL noise cancelling headphones continue to provide you with a superior audio experience.



Congratulations! You have now become well-versed in using your JBL noise cancelling headphones to their full potential. By understanding the technology behind noise cancellation, setting up your headphones, connecting them to devices, and controlling the noise cancellation levels, you can create an immersive and personalized listening experience. Additionally, optimizing audio quality, adjusting the fit for maximum comfort, maintaining and cleaning your headphones, and troubleshooting common issues will ensure their longevity and optimal performance.

As you embark on your journey with JBL noise cancelling headphones, remember to handle them with care and follow recommended maintenance practices. By doing so, you can enjoy hours of uninterrupted audio bliss. Whether you’re using your headphones for travel, work, or leisure, the ability to immerse yourself in your favorite music or audio content while blocking out external noise adds a new dimension to your overall listening experience. JBL noise cancelling headphones offer a sanctuary of sound that enhances any activity you choose.

If you encounter any challenges or technical issues, don’t hesitate to refer to the user manual or reach out to JBL customer support for assistance. They are a valuable resource for resolving any concerns and ensuring that you can make the most out of your headphones.

So, put on your JBL noise cancelling headphones, plug into your favorite playlist, and get ready to be transported to a world of crystal-clear audio. Whether you’re in the midst of a crowded airport, a bustling office, or simply seeking relaxation in the comfort of your own home, your JBL headphones will be there to provide you with an immersive and unparalleled sound experience.

Leave a Reply

Your email address will not be published. Required fields are marked *