To set up Wi-Fi calling on Samsung S20 FE, open your phone’s Settings, tap Connections, and select Wi-Fi Calling to toggle it on. This routes calls over your Wi‑Fi network, giving you clear audio in areas where cellular signal is weak or unavailable.
What you need to set up Wi-Fi calling on Samsung s20 fe
Before you begin, ensure your S20 FE is connected to a working Wi‑Fi network and has an active SIM card or eSIM with carrier service. Wi‑Fi Calling must also be supported by your network provider; most major carriers include this feature by default, but it’s worth confirming with them if you don’t see the option.
Enable Wi-Fi Calling from the settings menu
The primary way to turn on Wi‑Fi Calling is through the device settings. This method gives you full control over the feature and lets you register your emergency address if prompted.
- Open the Settings app on your Samsung S20 FE.
- Tap Connections.
- Select Wi-Fi Calling.
- Toggle the switch to On.
- If asked, enter or confirm your E911 emergency address and accept any terms.
Once enabled, your phone will prefer Wi‑Fi for calls whenever you’re connected to a network, even if cellular bars are low.
Enable Wi-Fi Calling from the quick settings panel
For faster access, you can toggle Wi‑Fi Calling directly from the quick settings panel, no need to dig through menus each time.
- Swipe down with two fingers from the top of the screen to open the quick settings panel.
- Tap the Wi-Fi Calling icon to turn it on or off.
If you don’t see the icon, tap the pencil or edit icon to add it to your quick settings for one‑tap access.
Make a Wi-Fi call
Once Wi‑Fi Calling is active, placing a call works just like a normal call. Open the Phone app, dial a number or pick a contact, and press the call button. Look for the Wi‑Fi calling indicator (usually a phone icon with Wi‑Fi symbol) in the status bar to confirm the call is routed over Wi‑Fi.
For calls to US numbers, Wi‑Fi calling typically does not use your mobile plan’s data allowance or count against cellular minutes. However, calls made over Wi‑Fi to international numbers are billed according to your international long‑distance plan, so check with your carrier if you frequently call abroad.
Troubleshooting Wi-Fi Calling problems
If Wi‑Fi Calling isn’t working as expected, work through these common fixes:
- Check Wi‑Fi stability, Ensure you’re connected to a strong, stable network. Weak signals can cause dropped or poor‑quality calls.
- Restart the device, A simple reboot clears temporary glitches that may block Wi‑Fi Calling.
- Verify your E911 address, Most carriers require a registered emergency address. Go back to Wi‑Fi Calling settings and confirm it’s correct.
- Update software, Install any pending system updates, as they often include fixes for calling features.
- Re‑enable after reset, Note that Wi‑Fi Calling settings do not survive a factory reset. If you reset your phone, you’ll need to turn Wi‑Fi Calling back on manually.
If problems persist, contact your carrier, they can verify whether Wi‑Fi Calling is provisioned correctly on your line and help with network‑specific issues.
