If you need to find Roku IP address without remote, the fastest path is to open the Roku mobile app on a phone that’s on the same Wi-Fi network as your Roku. The app acts as a virtual remote, letting you navigate to Settings > Network > About, where the IP address is displayed; if the app isn’t an option, your router’s connected-device list will show the Roku’s IP, and for a Roku with no Wi-Fi at all, a wired HDMI connection plus the device’s physical button will get you there. If the app itself won’t pair because the network is down, you can connect Roku remote without Wi-Fi to regain control first, or if you lost the physical remote entirely you can connect Roku TV without remote using the mobile app as a full substitute.
Prerequisites for a missing remote
Both the mobile app method and the router method assume your Roku is already connected to Wi-Fi. If the Roku has never joined a network or was recently reset, those two approaches won’t work, you’ll need the HDMI method described later. For the app and router methods, your phone or computer must be on the exact same network as the Roku. On iOS, open Settings > Apps > Roku and enable “Local Network” access; without that permission, the app can’t see the Roku. Also disable any VPN on your phone, a VPN routes traffic through a different network, which will block the app from finding the Roku.
Method 1: Use the Roku mobile app as a remote
The official Roku app is the most direct replacement for a lost physical remote. It not only shows the IP address but also gives you a full on-screen remote to control the Roku afterward.
- Install the Roku app from the Apple App Store or Google Play Store on your phone or tablet.
- Make sure your phone is connected to the same Wi-Fi network as the Roku device.
- Open the app. It will scan for Roku devices on the network and display them, tap the one you want.
- If the app doesn’t automatically connect, tap the device icon and then use the virtual remote that appears.
- Using the virtual remote, press Home, then navigate to Settings > Network > About.
- Read the IP address listed under “IP Address” or “Device Info.”
Once you have the IP, you can use it for troubleshooting, port forwarding, or third-party control apps. The virtual remote remains available, so you can keep using the app even after you’ve noted the address.
Method 2: Check your router’s connected devices
If you don’t want to install an app, your router already knows every device on your network, including the Roku. This method works as long as the Roku is online and you can log into the router’s admin page.
- Open a web browser on any device connected to the same network as the Roku.
- Enter your router’s IP address in the browser’s address bar, common ones are 192.168.0.1 or 192.168.1.1, but check your router’s label if those don’t work.
- Log in with the router’s admin username and password. If you haven’t changed them, look for the default credentials on the router sticker or in its manual.
- Find the DHCP client list or the “Connected Devices” section.
- If the name isn’t obvious, check the MAC address, Roku devices typically have a MAC prefix that identifies them as Roku hardware.
- Note the IP address next to the Roku’s entry.
This method is useful when you need the IP for network-level tasks like setting up a static lease or blocking the device. It also works if you have multiple Rokus, each will appear as a separate entry, so you can match the one you need by its name.
What to do if your Roku has no Wi-Fi connection
If the Roku isn’t connected to Wi-Fi at all, because it was reset, moved to a new network, or never set up, the mobile app and router methods fail. In that case, you need to see the Roku’s on-screen menu directly. This requires an HDMI cable and the physical button on the Roku device itself.
- Connect the Roku to your TV or monitor using an HDMI cable.
- Power on the TV and switch its input to the HDMI port where the Roku is connected.
- Press the physical button on the Roku device (usually located on the top or side of the box). This button acts as a basic remote, pressing it once selects an item, and pressing and holding it navigates.
- On the Roku home screen, use the physical button to highlight Settings, then press it to select.
- Navigate to Network, then About.
- Read the IP address on the screen.
Some Roku models also support a USB keyboard or mouse. If you plug one into the USB port, you can navigate the menus more easily, use arrow keys to move and Enter to select. This is faster than the single physical button, but not all Roku models accept USB input, so try it only if the button method feels too slow.
If your Roku is a TV model (not a streaming stick or box), the physical button is usually on the back or side of the TV itself, near the HDMI ports. The same navigation logic applies, use it to reach Settings > Network > About.
Troubleshooting and next steps
Once you have the IP address, you can ping it from a computer to confirm the Roku is reachable, use it to access the Roku’s web-based control interface (if enabled), or set up port forwarding for remote access. The IP is also required if you want to use third-party remote apps that don’t rely on the official Roku app.
If the IP address you find doesn’t work, double-check that you’re looking at the right device, routers sometimes list multiple Rokus, and the app might show a neighbor’s Roku if you’re on a shared network.
For a lost remote, you can pair a new one directly from the Roku’s settings menu once you’re back online, no IP needed. If the Roku won’t connect to Wi-Fi at all, you can use the HDMI method to reach the network setup screen and enter your Wi-Fi password with the on-screen keyboard. If you need further assistance, you can contact Roku support through their official website, and they can walk you through account-specific steps or warranty options.
