How To Change The Color Of Corsair RAM



Welcome to this guide on how to change the color of your Corsair RAM. If you’re looking to customize the appearance of your computer’s memory modules, this step-by-step tutorial will show you exactly how to do it. The Corsair RAM modules are known for their high-performance capabilities, but sometimes you might want to give them a personal touch to match your unique style or build theme.

Changing the color of your RAM not only adds a visual flair to your computer, but it can also be a fun and creative project to undertake. Whether you want to match the colors of your other PC components, create a stunning contrast, or simply express your individuality, this guide will walk you through the process.

Before we dive into the step-by-step instructions, it’s important to note that any modifications you make to your RAM module will likely void its warranty. Proceed with caution and understand the risks involved. Additionally, keep in mind that you should only paint the exterior surfaces of the RAM module itself and avoid any vital components or the circuit board.

Now that we have the necessary disclaimers out of the way, let’s take a look at the tools and materials you will need to get started on this exciting project.


Tools and Materials Needed

Before you embark on the journey of changing the color of your Corsair RAM, make sure you have the following tools and materials ready:

  1. Phillips screwdriver: This will be used to remove the screws securing the RAM modules.
  2. Plastic pry tool: This tool will help you carefully separate the RAM module without causing any damage to its delicate components.
  3. Sandpaper or sanding block: To prepare the surface of the RAM for painting, you will need fine-grit sandpaper or a sanding block.
  4. Masking tape: It’s crucial to mask any areas you don’t want to be painted, such as the gold contacts or the circuit board.
  5. Spray paint: Choose a high-quality spray paint suitable for use on electronic devices. Make sure it is compatible with the material of your RAM module.
  6. Clear coat sealant: To protect the newly painted surface and ensure its longevity, a clear coat sealant is essential. Look for a sealant specifically designed for use on electronic components.
  7. Well-ventilated workspace: Find a clean and well-ventilated area, preferably outdoors, to carry out the painting process. Safety should always be a priority, so ensure good airflow and wear a mask to avoid inhaling any fumes.

These tools and materials are essential for undertaking this project effectively and safely. Now that you have everything you need, let’s move on to the step-by-step instructions on how to change the color of your Corsair RAM modules.


Step 1: Removing the RAM from Your PC

The first step in changing the color of your Corsair RAM is to remove the memory modules from your PC. Follow these instructions:

  1. Turn off your computer and unplug it from the power source. This ensures your safety and protects your PC components.
  2. Locate the RAM slots on your motherboard. They are usually positioned near the CPU socket.
  3. Use a Phillips screwdriver to remove any screws securing the RAM slots. These screws may vary depending on your motherboard model.
  4. Gently press the release clips on the RAM slots to release the modules. The clips are usually located on both sides of the slot.
  5. Once the clips are released, carefully remove the RAM modules by pulling them straight out from the slots.
  6. Place the RAM modules on an anti-static surface, such as an anti-static mat or a piece of non-conductive material, to prevent any damage caused by static electricity.

It’s important to handle the RAM modules with care and avoid touching the gold contacts or any sensitive components. By properly removing the RAM from your PC, you can proceed to the next steps without any difficulties.


Step 2: Disassembling the RAM

Now that you have safely removed the RAM modules from your PC, the next step is to disassemble them. Follow these instructions:

  1. Inspect the RAM modules for any screws or clips holding the heatsinks or cover in place. The disassembly process may vary depending on your specific Corsair RAM model.
  2. Use a Phillips screwdriver to remove any screws attaching the heatsinks or cover to the RAM modules. Keep these screws in a safe place as you will need them for reassembly later.
  3. If there are no screws, you may need to carefully pry off the heatsinks or cover using a plastic pry tool. Gently insert the tool between the heatsink/cover and the RAM module, applying even pressure to separate them.
  4. Once the heatsinks or cover are removed, you will have access to the RAM chips. Be cautious not to touch or damage any of the components.
  5. Set aside the heatsinks or cover and keep them in a safe place. You will paint these separately later in the process.

Disassembling the RAM modules allows you to have more control over the painting process and ensures an even color application. Take your time and be gentle when removing the heatsinks or cover, as you don’t want to accidentally damage any part of the RAM module. With the RAM modules now disassembled, let’s move on to the next step of preparing the RAM for painting.


Step 3: Preparing the RAM for Painting

Before you can start painting your Corsair RAM, it’s crucial to properly prepare the surfaces to ensure paint adhesion and a smooth finish. Follow these steps to prepare the RAM modules for painting:

  1. Using fine-grit sandpaper or a sanding block, gently sand the exterior surfaces of the RAM modules. This step helps remove any existing coatings or imperfections that may interfere with paint adhesion. Be sure to sand in a consistent and even manner.
  2. After sanding, wipe down the RAM modules with a clean, lint-free cloth to remove any dust or debris. This step will help create a clean surface for painting.
  3. Next, use masking tape to cover any areas of the RAM module that you don’t want to be painted. This includes the gold contacts, as well as any exposed circuit board or sensitive components. Take your time to ensure the tape is applied securely and covers the intended areas.
  4. Prepare your painting area by laying down a drop cloth or newspaper to protect the surface. Ensure that the workspace is well-ventilated to avoid inhaling any fumes.
  5. It’s also a good idea to wear gloves to protect your hands from any paint or chemicals.

By properly preparing the RAM modules before painting, you increase the chances of achieving a professional-looking and long-lasting finish. Once the RAM modules are prepped and masked, you’re ready to move on to the exciting part: applying the paint.


Step 4: Applying the Paint

With the RAM modules prepped and ready, it’s time to apply the paint to achieve the desired color. Follow these steps to effectively apply paint to your Corsair RAM:

  1. Hold the RAM modules by their edges and position them on your painting surface. Ensure they are stable and won’t roll or move during the painting process.
  2. Shake the spray paint can vigorously for a few seconds to ensure the paint is well-mixed.
  3. Starting with light and even strokes, begin spraying the paint onto the RAM modules. Keep the can moving continuously to avoid excess buildup of paint in one area.
  4. Apply multiple thin coats of paint, allowing sufficient drying time between each coat. This layering technique helps achieve a more uniform and vibrant color.
  5. Be patient and avoid the temptation to apply thick coats of paint, as this can lead to drips, uneven textures, or extended drying times.
  6. Once you are satisfied with the coverage and color, let the RAM modules dry completely according to the instructions provided by the paint manufacturer.

Remember, patience and attention to detail are key when applying paint to your RAM modules. Take your time and ensure even coverage for the best results. After the paint has dried, you can move on to the next step of sealing the paint to protect the newly painted surfaces.


Step 5: Drying and Sealing the Paint

Once you have applied the paint to your Corsair RAM modules, it’s important to allow them to dry thoroughly before proceeding. Follow these steps to properly dry and seal the paint:

  1. Find a clean and well-ventilated area to let the RAM modules dry. This can be indoors with good airflow or outdoors, depending on your preference and the weather conditions.
  2. Follow the drying time specified on the paint can. It’s essential to give the paint enough time to cure properly and avoid any potential damage or smudging.
  3. After the paint has completely dried, it’s time to seal the newly painted surfaces. Choose a clear coat sealant specifically designed for use on electronic components.
  4. Hold the clear coat sealant can about 6 inches away from the RAM modules and spray a light, even coat over the painted surfaces. Keep the can moving to achieve uniform coverage.
  5. Allow the clear coat sealant to dry completely according to the instructions provided by the manufacturer. This sealant will not only protect the paint but also provide a glossy finish and improve durability.
  6. Once the clear coat is dried, inspect the RAM modules to ensure there are no smudges, imperfections, or areas that need touch-ups.

Properly drying and sealing the paint will help protect your newly painted RAM modules and provide a finished look to your customization. After completing this step, you’re ready to move on to the next part of the process: reassembling the RAM.


Step 6: Reassembling the RAM

Now that you have successfully painted and sealed your Corsair RAM modules, it’s time to reassemble them. Follow these steps to put everything back together:

  1. Take the heatsinks or covers that you set aside during the disassembly process. Make sure they are clean and free from any paint residue.
  2. Carefully align the heatsinks or covers with the RAM modules, ensuring they are properly oriented and fit together snugly.
  3. Secure the heatsinks or covers in place by either reinstalling the screws you removed earlier or engaging the clips.
  4. Ensure that all screws are tightened properly, but be cautious not to overtighten and risk damaging the RAM modules or the heatsinks/covers.

Once the RAM modules are reassembled, it’s time to move on to the final step: installing the newly painted RAM back into your computer.


Step 7: Installing the Newly Painted RAM

With your newly painted and reassembled Corsair RAM modules, it’s time to install them back into your computer. Follow these steps to properly install the RAM:

  1. Locate the RAM slots on your motherboard. They are usually positioned near the CPU socket.
  2. Gently insert the RAM modules into the slots, ensuring they are aligned with the notches on the slots.
  3. Apply firm and even pressure on the RAM modules until you hear a click or feel them securely seated in the slots. The release clips should engage automatically.
  4. Double-check that the RAM modules are fully seated by gently pressing down on them and ensuring they don’t move or wobble.
  5. If you have multiple RAM modules, make sure they are installed in the correct slots as specified by your motherboard’s manual for optimal performance.
  6. Once the RAM modules are securely installed, reattach any cables or connectors that were disconnected during the removal process.
  7. Finally, plug in your computer and power it on to ensure that the newly painted RAM modules are recognized and functioning properly.

Now that you have successfully installed the newly painted RAM, take a moment to admire the personalized touch it adds to your computer. Enjoy the satisfaction of completing this creative project and showcasing your unique style.

Remember, always exercise caution and ensure that you are comfortable with the modification process before undertaking any modifications to your computer components. Enjoy your newly customized Corsair RAM and the enhanced aesthetics it brings to your PC setup!



Changing the color of your Corsair RAM modules can be a rewarding and enjoyable DIY project for computer enthusiasts. By following the step-by-step instructions outlined in this guide, you can successfully customize the appearance of your RAM to match your style or build theme.

Throughout the process, it’s important to remember a few key points. First, be sure to handle the RAM modules with care, avoiding contact with sensitive components and protecting the gold contacts. Second, make sure to properly prepare the RAM modules before painting by sanding the surfaces and masking off any areas that should not be painted. Third, take your time during the painting process to achieve even coats and allow each layer to dry before applying the next. Fourth, seal the painted surfaces with a clear coat sealant to protect the finish and increase durability.

With your newly painted and reassembled RAM modules, you can now install them back into your computer, completing the customization process. Remember to follow proper installation procedures and ensure that the RAM is securely seated in the slots.

While this guide provides a general overview of changing the color of Corsair RAM modules, it’s essential to consider any warranty implications and potential risks involved. Be sure to understand the manufacturer’s policies and exercise caution throughout the process.

With your creativity and attention to detail, you have transformed your Corsair RAM into a customized masterpiece. Enjoy the visual enhancement it brings to your computer and take pride in your personalized computer build.

Now, go ahead and showcase your unique style with the newly painted Corsair RAM, and let your computer setup stand out from the rest.

Leave a Reply

Your email address will not be published. Required fields are marked *