To connect a Xiaomi remote to your TV, you can use either a button combination or the TV's settings menu. Both methods require fresh batteries and holding the remote within 20-30 cm of the screen throughout the process.
Before you connect Xiaomi remote to TV
Insert fresh batteries into the remote, making sure the polarity matches the markings inside the compartment. The single most important rule is to keep the remote within 20-30 cm of the TV during the entire pairing process. For a stable Bluetooth connection, some models work best when the remote is held even closer, within 10 cm.
Method 1: pair using the button combination
- Turn on the Mi smart TV and wait for the home screen to load completely.
- Position the remote 20-30 cm from the television.
- Press and hold the Home and OK buttons on the remote simultaneously for 5-10 seconds.
- A Bluetooth pairing prompt should appear on the TV screen.
- Follow any on-screen instructions to complete the pairing process.
Model-specific pairing combinations
For some Mi TV remotes, the pairing combination is Home and Mi buttons held together for about 5 seconds. For the Xiaomi TV A 55 2025, press and hold the Xiaomi TV+ and Home buttons simultaneously for a few seconds. For "All-in-one" Xiaomi TVs, hold the remote close to the screen, usually in the lower right corner. For "Split" Xiaomi TVs, hold the remote close to the bottom of the screen, as the Bluetooth module location varies by generation. For Mi Box devices, hold the remote close to the surface of the box during pairing.
Method 2: pair using the TV settings menu
- Open Settings on your TV.
- Select Remotes and Accessories (or Peripherals and Bluetooth).
- Tap Pair accessory (or Add the MI Bluetooth remote control).
- Follow the on-screen instructions to complete the pairing.
For re-pairing a Mi Box S (2nd Gen) remote, first go to Settings > Remotes & Accessories and Forget the existing remote, then proceed to add the accessory.
Troubleshooting: what to do if pairing fails
If pairing fails, restart the TV and repeat the button combination. To reset the remote, remove the batteries, press and hold the Power button on the remote for 20-30 seconds, then put the batteries back in. Ensure the batteries are correctly inserted and have enough power; try replacing them with fresh batteries. Nearby electronic devices, fluorescent lights, or other sources of interference can disrupt the remote's signal, so ensure there is a clear line of sight between the remote control and the TV. For Xiaomi TV Box S (2nd Gen), ensure the firmware is up to date by navigating to Settings > System > About > System update. If you ever need to share your TV display with another device, you can use screen mirroring to a TV for wireless content sharing.
