To change the color on your Rii gaming keyboard, press and hold the **Fn** key and tap the **Light** key, usually located near the right **Ctrl**, to cycle through the available static colors and then Off. This keyboard shortcut is the fastest way to change the color on an Aula gaming keyboard, and it works instantly without any software. If you have a different model, the same Fn + Light combination also lets you toggle through lighting modes, so start there before exploring other options. If you're setting up a full gaming station, you might also need to change keyboard color on asus tuf gaming laptop to match your new peripheral.
How to change color on a Rii gaming keyboard: using Fn + Light
The primary method for changing the backlight color on a Rii gaming keyboard is the Fn + Light key combination. The Light key is typically the one with a sun or star icon, located near the right Ctrl key. Press and hold Fn, then tap the Light key to cycle through the available colors and modes. Each press cycles to the next option in that fixed order, so you can quickly find the color you want. If you own a different brand, the steps to change color on skytech gaming keyboard follow a similar shortcut-based approach. This works on all Rii models that feature the three-color LED backlight, and it requires no drivers or additional setup, just the keyboard itself.
If you press Fn + Light repeatedly, you’ll cycle through the available colors and modes in a fixed order. This means you can’t jump directly to a specific color; you have to cycle through them. The Light key’s location near the right Ctrl makes it easy to reach with your right thumb or pinky while your fingers stay on the home row, so you can change colors mid-game without looking down.
Activating breathing light mode
To activate breathing light mode on your Rii gaming keyboard, press Fn + Light key once, this switches from static color mode to breathing mode, where the current color fades in and out. Once you’re in breathing mode, subsequent presses of Fn + Light will cycle through the available colors but now in a pulsing animation instead of a steady glow. The breathing effect gives your keyboard a more dynamic look, which is ideal for gaming in low-light rooms or when you want visual feedback without staring at a constant bright light.
If you want to adjust how fast the breathing effect pulses, use the Fn key together with the plus (+) or minus (-) keys on the numeric keypad. Pressing Fn + + speeds up the breathing rate, while Fn + - slows it down. This gives you fine control over the ambiance, whether you prefer a slow, calming pulse or a rapid, energetic beat. Note that this speed adjustment only works while breathing mode is active; if you switch back to static mode and then return to breathing, the speed resets to the default.
Adjusting backlight brightness
To adjust the backlight brightness on your Rii gaming keyboard, press Fn + PgUp to increase brightness and Fn + PgDn to decrease it. The keyboard has four brightness levels, so each press of Fn + PgUp moves up one level, and Fn + PgDn moves down one. The lowest setting is effectively off, but if you want to keep a subtle glow, you can stop at level one. This is useful when you’re gaming in a dark room and don’t want the backlight to strain your eyes, or when you’re in a bright environment and need maximum visibility for the keycaps.
Brightness adjustment works independently of the color mode, so you can have a bright red static glow or a dim purple breathing effect. For example, if you set the color to Blue and then press Fn + PgDn twice, you’ll get a medium-blue backlight that’s easy on the eyes. The four levels give you enough granularity to match the lighting to your surroundings, and the setting persists until you change it again, even after unplugging and replugging the keyboard, the brightness stays where you left it.
Turning the backlight off completely
To turn off the backlight on your Rii gaming keyboard completely, press the Light key three times consecutively, without holding Fn, or use the Fn + Light combination to cycle to the Off state. This is a dedicated shortcut that works regardless of the current color or mode. The first press might switch to a different color or mode, the second press might cycle again, but the third press turns the backlight off entirely. This is different from pressing Fn + Light once, which only cycles to the Off state if you’re already on Purple; the triple-press works from any state, so it’s the fastest way to kill the lights.
If you only want to toggle the backlight on or off without changing the color, you can also press the dedicated Light key once (without Fn) to switch between the last-used setting and off. However, this single-press toggle isn’t available on all Rii models, some only support the triple-press method. On keyboards that do support it, the Light key will remember your last color and brightness, so pressing it once brings the backlight back exactly as you left it. For models that don’t, you’ll need to cycle through Fn + Light until you reach the Off state, or use the triple-press shortcut to turn it off instantly.
