Older blog entries for edleighton (starting at number 2)

Hi all,

Just come back from a 1000 Km drive to the Northern Cape and back. I discovered ANFY from a robot enthusiast that contacted me by email. What a lovely package to enhance your website with!

Check out my robot displayed with an ANFY effect!

www.geocities.com/zs6bne/anfytest/myanfytest.htm

I was amazed I'm sure you would be too!

Greetings,

Eddie

Hi all,

I mounted my large castor wheel onto the MACH 2001 this weekend and it worked very well. I had to make a very sturdy bracket for it after I found out the hard way that a flimsy bracket gives the effect of a car with worn shock absorbers! :)

There is more to robotics than meets the eye. I wrote a program for the MACH 2001 in PASCAL to go forward and relying on the IR Proximity sensors to avoid obstacles , but the battery voltage went low causing the IR sensitivity to decrease. The robot rammed into a cupboard and almost damaged the electronics!

Whats more to building robots is presenting it on a web page. I discovered new things in HTML for frames and although it seems simple now , it was a mission to learn. :) My son helped me there!

Well here's to a new week that lies ahead.

Happy roboting!

Eddie ..........

Hi it is almost the easter weekend. I managed to get hold of a large castor wheel at an amateur radio flea market last weekend. My plan is to mount this castor as a third wheel for the robot lawnmower instead of the 2 balancing castor wheels presently employed on the robot.

My infrared proximity detectors are mounted and are working on the +5 volt power supply used for the 386 computer. The detector is unfortunately prone to ambient light even though the signal is modulated at +- 3 Khz and the same filter on the receiver.

I should have more photos of the latest developments which I will post on my web page as soon as I can get them developed. Note the diagrams for the motor control and infrared units are also on my site now.

Greetings to you all

X
Share this page