dalton hindle is currently certified at Journeyer level.

Name: d'alton hindle
Member since: 2008-07-25 06:18:28
Last Login: 2008-09-17 18:25:59

FOAF RDF Share This

Homepage: daltonhindle


student. interested in hardware and analog stuff. would like to focus on sound engineering. currently studying electronics in Winnipeg.

Recent blog entries by dalton hindle

Syndication: RSS 2.0
17 Sep 2008 (updated 17 Sep 2008 at 18:24 UTC) »

Progress Report #3

Our plans have changed, somewhat.

As we prepared to do the programming of this bird, we ran into issues "sensing" the data we need. These mulitlple sensors do not exist in a single, user-friendly package. So we have decided to build it.

We are combining our accelerometer, a tachometer, an altimeter (which is what we are building right now), and a GPS system. We will be interfacing them in a central package that can be used for this plane as well as any other moving vehicle.

The system will send data to our rabbit and then to a laptop, where we can manipulate the data so we can display a flight pattern using Google Earth.

Once completed, the battery-powered package could be attached to almost anything, from unmanned flight to the Terry Fox run.

3 Sep 2008 (updated 3 Sep 2008 at 19:03 UTC) »

Progress Report #1 September 2nd, 2008

So far, our project is an attempt to control the flight of an RC plane with the Rabbit microprocessor. To do this we need several things....

Firstly, we need to acquire servos and an accelerometer. Then we must interface them with the Rabbit.

Second, we will implement switches to allow us to select different flight patterns before lift-off. This can be done with a simple DIP switch. Different combinations of switches will create different flight patterns.

Third, we hope to add a pitot tube to help us measure the air speed, which we will then use to perfect the flight patterns.

Also, we would also like to include an IC circuit that help us measure altitude.

The last two additions to the project are to aid in un-manned flight. Our first goal is obviously to get the accelerometers, servos, and rabbit communicating properly. The pitot tube and the altitude measurements are improvements that we can see would be the obvious next steps. We would consider communication with the servos to be a success, but are not setting a goal right now as to where we will be in December.

i am currently looking into how to become certified on this crazy website.....


Others have certified dalton hindle as follows:

  • TCJ certified dalton hindle as Journeyer

[ Certification disabled because you're not logged in. ]

Robot of the Day


Built by
Christian Vlaskowits

Recent blogs

30 Sep 2017 evilrobots (Observer)
10 Jun 2017 wedesoft (Master)
9 Jun 2017 mwaibel (Master)
25 May 2017 AI4U (Observer)
25 Feb 2017 steve (Master)
16 Aug 2016 Flanneltron (Journeyer)
27 Jun 2016 Petar.Kormushev (Master)
2 May 2016 motters (Master)
10 Sep 2015 svo (Master)
14 Nov 2014 Sergey Popov (Apprentice)
3 Jul 2014 jmhenry (Journeyer)
10 Jun 2014 robotvibes (Master)
13 Nov 2013 jlin (Master)
23 Jun 2013 Mubot (Master)
13 May 2013 JLaplace (Observer)
21 Apr 2013 Pi Robot (Master)
12 Apr 2013 Pontifier (Apprentice)
16 Mar 2013 gidesa (Journeyer)

Newest Members

Newest Robots

7 Aug 2009 Titan EOD
13 May 2009 Spacechair
6 Feb 2009 K-bot
9 Jan 2009 3 in 1 Bot
15 Dec 2008 UMEEBOT
10 Nov 2008 Robot
10 Nov 2008 SAMM
24 Oct 2008 Romulus
30 Sep 2008 CD-Bot
26 Sep 2008 Little Johnny
Share this page