Roko is currently certified at Apprentice level.

Name: Roger Korus
Member since: 2009-04-27 20:44:26
Last Login: 2016-09-13 03:33:55

FOAF RDF Share This



Recent blog entries by Roko

Syndication: RSS 2.0

Code Progress is Still Progress

It’s been a long time since I’ve updated, and to those following my project I apologize, I know how annoying it is to see an interesting project on the net stall for years. (well, at least I hope my project the info I’m putting is useful/interesting/inspiring to others)

Long story short, I left my old job last December, moved cities and started a new job in a different industry. Needless to say, life has been busy, and I haven’t had as much time for my projects as I’d like, which may or may not be a good thing depending how you view it. Moving 1,154 km away from my Dad’s basement workshop hasn’t helped either. No more driving to my parents place to do machine work in my spare time. I’m left to slowly acquire my own tools now.

I haven’t forgotten about the quadruped, and have even managed to get some work done on it. I’ve powered up the motor drivers and haven’t found any major design errors yet, which is a good sign. Motors are spinning, and potentiometers are being sensed properly. I still need to do a bit of work to tap the 0-80 holes to mount the angle sensors, and machine the drive shafts a little bit to engage said angle sensors properly, before I can get the PID controller working properly to move the joint to the appropriate angle.

I’m also considering moving to brass gears, at least on the motor. I’m not overly concerned about the Delrin gears stripping, as there shouldn’t be a massive loads on them that cause outright concern, but I am having trouble mounting them securely to the motor shafts. As it ends up, Delrin is a bit flexible, enough so that it won’t hold a set screw securely, and even with a set screw the motor shafts end up spinning inside the gear. Moving to a brass screw should solve this problem, and is likely the easiest solution, albeit a little bit expensive.

On that note, you may have noticed I’ve put up ads. For the longest time I’ve been against ads on my personal website, but web hosting and robotics as a hobby does cost money. I haven’t really settled on whether or not I’ll keep the ads yet…

Syndicated 2010-08-22 03:52:31 from » Robotics

A Blast From The Past (Sumo Style) Part I

It’s been a busy summer (and then winter), involving getting a new job and moving to a new city, so I haven’t had much time to work on my robots much recently, let alone update my blog! So, instead of posting any updates on my robots (those will come later on when I get more work done), I’ve dug up some information on one of my older Sumo Robots, aptly named:


Chomp! in Competition

Chomp! in Competition

Chomp! was my first sumo robot, and first robot beyond BEAM robotics. Built in my High School years, it competed for the first time in the 2000 Western Canadian Robot Games, and placed first in the 5kg Autonomous Sumo competition. Although slow and lumbering, this robot had a good (for the time) vision system and protective skirt system that deployed on startup.

The brains of the Sumo was the rustic Basic Stamp II, powering an L298 H-bridge that controlled 4 motors, one per wheel. An aluminum frame held the robot together, and a custom made decals gave the robot a nice fierce personality ;)

Back before the days of commonly available Sharp IR Rangefinders, I used a solution involving Modulated IR sensors (40 kHz) and modulated IR LEDs. By toggling the LEDs on or off, from a single sensor I could determine if the robot was to the left, right or front of me. A far cry from ‘1.21 GW‘, my current mini sumo, but it worked, and helped get the robot first place!

Chomp! preparing for Battle, before deploying protective skirts

Chomp! preparing for Battle, before deploying protective skirts

Chomp! went on to compete in the 200 WCRG for the next year or two, but other robots rapidly improved over the years, and Chomp! became too slow and the protective flaps too weak for stronger robots.

Chomp! actually had a sister (brother?) robot, named “Fatal Discharge”, which never ended up working right. Unfortunately, this was before I figured out enough about motor controllers to know that the L298 wasn’t quite up to the task.

After Chomp!, I went on to build “Event Horizon”, which was a moderately successful robot, and one of the first in Canada to have a vacuum system for increased traction. But more on that later…..

Syndicated 2010-06-04 02:40:53 from » Robotics

Quadrupeds Need a Whole Lot of Motor Controllers

It’s been a while since my last update on the Quadruped’s build progress, but I finally got my PCBs back for the motor controllers. Since the robot has twelve motors, I need six motor controllers in total (Each of my controllers controls two motors). They’re an updated version of the h-bridge I prototyped last fall, [...]

Syndicated 2009-06-05 04:35:02 from » Robotics

Some Random Stuff

One of my co workers working on a GPS project of his own managed to aquire some Sarantel Helical antennas, and got some for me as well. I’m planning on using them with the U-blox GPS module I have had sitting around. (I origionally bought the GSP module for a MUAV autopilot I’ve been slowly [...]

Syndicated 2009-05-09 16:45:44 from » Robotics

2009 Western Canadian Robot Games I

I spent the second half of last week scrambling to get my mini sumo robot, 1.21 Gw into a working condition for the robot games. I populated the circuit boards mentioned in an earlier post but as I grew low on time I decided to put those aside for this year. Instead of trying to [...]

Syndicated 2009-05-05 18:23:00 from

10 older entries...


Others have certified Roko as follows:

[ Certification disabled because you're not logged in. ]

Robot of the Day


Built by
Christian Vlaskowits

Recent blogs

30 Sep 2017 evilrobots (Observer)
10 Jun 2017 wedesoft (Master)
9 Jun 2017 mwaibel (Master)
25 May 2017 AI4U (Observer)
25 Feb 2017 steve (Master)
16 Aug 2016 Flanneltron (Journeyer)
27 Jun 2016 Petar.Kormushev (Master)
2 May 2016 motters (Master)
10 Sep 2015 svo (Master)
14 Nov 2014 Sergey Popov (Apprentice)
3 Jul 2014 jmhenry (Journeyer)
10 Jun 2014 robotvibes (Master)
13 Nov 2013 jlin (Master)
23 Jun 2013 Mubot (Master)
13 May 2013 JLaplace (Observer)
21 Apr 2013 Pi Robot (Master)
12 Apr 2013 Pontifier (Apprentice)
16 Mar 2013 gidesa (Journeyer)

Newest Members

Newest Robots

7 Aug 2009 Titan EOD
13 May 2009 Spacechair
6 Feb 2009 K-bot
9 Jan 2009 3 in 1 Bot
15 Dec 2008 UMEEBOT
10 Nov 2008 Robot
10 Nov 2008 SAMM
24 Oct 2008 Romulus
30 Sep 2008 CD-Bot
26 Sep 2008 Little Johnny
Share this page