ROB.T. is currently certified at Master level.

Name: Rob Turner
Member since: 2002-02-09 18:59:24
Last Login: 2009-06-10 18:33:06

FOAF RDF Share This



Forgive community for I have sinned. It's been 4 years since I built my last robot - I've been consumed with pokerbots. Happily I put some tutorials up on my site - I figure it will be another 2 years before I can build a new bot, in the mean time I'll just lurk...

Recent blog entries by ROB.T.

Syndication: RSS 2.0

I've started posting pokerbot tutorials to my site -

I think I've got another 2 years before I start building robots again, but the logic between a pokerbot and a robot is amazingly similiar.

4 May 2005 (updated 4 May 2005 at 02:02 UTC) »
Jeff Sampson, Twin Cities Robotics Group President posted some pictures to our group of our last meeting. At the top of the page you will find several pictures of the 8-legged robot I have been working on this year. Naturally its not walking yet but I hope to have it walking this year... let me get back to you.

Here is a better summary of where I'm at with my project. The source is an email to the TCRG list -

>Bruce wrote:

> ps -- Rob, how is Robocities coming along? If you need some help, the > group is ready to step up and provide whatever you need. Right group :?) >

Robocities is making me cry. Major engineering hurdles, no time. Maybe the group could take my wife and kids for a few weeks? :-)

Seriously folks -

Bruce I'm looking at constructing not so much a city but a ziggurat, kind of like a square tower of Babel out of pink foamular(tm) insulation foam (how strange is that). Unfortunately planning out an entire city would be just too hard for a protocity, so if this structure is too weird for the Science Museum, hey I understand.

What I'll need is a 11' x 11' space, about 11' high. I'll need another 10' x 10' space to put the pre-build material. These dimensions can be scaled down as needed.

What we're looking at, with as many corners cut as I could manage, is 4 robots; 1 to place bricks, 1 to deliver bricks, 1 to deliver roof/floor tiles, 1 to deliver ramps. The walls will be 16" high making each level 17" high with the tiles. The roof tiles are approximately 32" x 32", the individual bricks are 8" x 4" x 8". 7 levels total with a 32" x 32" spot on the top of the building for the robots to sit when the structure is complete. The walls will actually be laid as "hallways" or "tunnels" that run through the structure; I currently have no plan for building a closing wall around these tunnels so you'll be able to see through the ziggurat structure.

Engineering hurdles-

The whole system is based on the brick laying robot because that is the robot that will move the least. One challenge was to determine if this robot would give direction, or if a computer would control the show. Having the robot give direction to the other robots was really attractive because then I wouldn't have to program any other systems like a computer. But, because I have some calibration considerations and yet I don't want to lug a computer around, I've decided to program a PDA to do the decision making in an extremely centralized method. I expect to change this in future upgrades (famous last words).

I'm trying to create an initial system with the least complexity possible to insure completion by the deadline. This means I'll be doing a lot of experimenting in the future weeks and then adding hardware/software as needed. For example initially I want to see if dead-reckoning is enough to get the protocity built, then I'll add an accelerometer, compass, etc. What I don't want to do is add stuff that I think I'll need and increasing the complexity.

Mechanically, I finally built the arm design I like the most for the brick layer, wired up the base, and I'm adding sensors and getting ready to program. This is the first robot, but don't panic yet (let me do the panicking here), this is the hard one, the other three robots will be significantly easier to build and program after this one is done.

Another problem is preparing the bricks and the tiles, and how to configure them as pre-build material that's accessible to the robots. This will probably be the last thing I work on, which means this is probably the thing that's going to get skipped and I get to hand my robots material by hand (bummer). Oh and I doubt the robots will have enough battery power to complete the structure, so I'll need to swap out the batteries without having the system lose it's place. Charging the robots is currently not an option since this will increase the complexity.

Rapid-Prototyping Boards have been a really big help, but there are still some flaws that are being worked out like my motor drivers stack on the motor interface board poorly.

Lastly, I was just relating to Jeff Sampson earlier that I don't think I've ever completed a robotics project to this degree, so some funny stuff is coming up like what software component to program first.

To sum it up - overall I would say I'm about 6 months behind but progressing nicely.


OK, 1 month to go to meet the St. Paul Science Museum/Shapiro deadline for having my robots build the first proto - robocity. I've been working like a phene, but chances are I'm not going to meet the Nov 8th deadline. Right now I'm about a month behind and I really didn't understand how much infrastructure had to be in place - it's amazing. I could put 2 or 3 guys to work and still not make it.

But that is neither here nor there, I've got a month, I've found an arm design I like for the first robot so I've started throwing the electronics together and programming it. I've got a real good idea of what needs to be done and what corners to cut. and the game ain't over.

3 Sep 2003 (updated 3 Sep 2003 at 20:36 UTC) »

So I've been soldering boards for the last month and I'm about 85-90% done. Here's a picture (See the 9/03/2003 picture on the right). OK, I might have taken a little-bit of time and upgraded my computer system to 2.4GHz P4 on an 800 MHz bus with 1Gig of RAM, 6 - USB 2.0 ports and an Ethernet port on board, a 7200 RPM 160Gig HD, DVD Rom Burner, WinTV, Windows and Office XP professional (yes, I $upport the empire), etc. - I kept my Matrox video card with the dual monitors. I'm pretty happy with it. Now understand, I didn't WANT to build this computer system, I HAD to build it - to support the robotics GUI for the Robocities ;-).

Speaking of Robocities - this month I want to get the first set of city-building robots done and build the first proto-city. I also have to test all boards I've put together. My goal is to have something to show for our next TCRG robotics meeting.

28 older entries...


ROB.T. certified others as follows:

Others have certified ROB.T. as follows:

[ Certification disabled because you're not logged in. ]

Robot of the Day


Built by
Christian Vlaskowits

Recent blogs

30 Sep 2017 evilrobots (Observer)
10 Jun 2017 wedesoft (Master)
9 Jun 2017 mwaibel (Master)
25 May 2017 AI4U (Observer)
25 Feb 2017 steve (Master)
16 Aug 2016 Flanneltron (Journeyer)
27 Jun 2016 Petar.Kormushev (Master)
2 May 2016 motters (Master)
10 Sep 2015 svo (Master)
14 Nov 2014 Sergey Popov (Apprentice)
3 Jul 2014 jmhenry (Journeyer)
10 Jun 2014 robotvibes (Master)
13 Nov 2013 jlin (Master)
23 Jun 2013 Mubot (Master)
13 May 2013 JLaplace (Observer)
21 Apr 2013 Pi Robot (Master)
12 Apr 2013 Pontifier (Apprentice)
16 Mar 2013 gidesa (Journeyer)

Newest Members

Newest Robots

7 Aug 2009 Titan EOD
13 May 2009 Spacechair
6 Feb 2009 K-bot
9 Jan 2009 3 in 1 Bot
15 Dec 2008 UMEEBOT
10 Nov 2008 Robot
10 Nov 2008 SAMM
24 Oct 2008 Romulus
30 Sep 2008 CD-Bot
26 Sep 2008 Little Johnny
Share this page