5 Jul 2005 BrianJennings   » (Observer)

I tried the H-Bridge again today, I got it to run power through it to an LED and that worked, I could turn the LED on and off using an output on my BS2 to the transistor's gate. But when I hooked the motor up to is, the motor didn't turn on. So I tried connecting the motor up to the power directly, it ran fine, so I put the LED into the circuit with the motor and the transistor and the LED didn't light up, so I unplugged the motor from the circuit and the LED lit, so I am assuming that the motor is not able to be run through that transistor, maybe the transistor is limiting the flow, or restricting something somewhere. If you have any comments or questions, see my blog...

Latest blog entries     Older blog entries

X
Share this page